Category: holidays

3D Printed Musical Santa Ornament

3D Printed Musical Santa Ornament

🎄NEW VIDEO🎄

I modeled and printed a giant Santa head ornament with a cut out in the back for electronics; specifically a Gemma board with a button and small speaker to play chiptune Xmas songs. This was my first time modeling a more sculpture-esque print so it was definitely an experience and I learned a lot for next time.

🎅🎅🎅

Cyborg Santa 🎅🏻🤖 #diy #tech #electronics #…

Cyborg Santa 🎅🏻🤖

#diy #tech #electronics #hardware #opensource #openhardware #make #makersgonnamake #makersmovement #holidays #xmas #santa #nerdlife

This is the circuit for the Santa ornament 🎅…

This is the circuit for the Santa ornament 🎅🏻 was originally going to use a Trinket but for a variety of reasons I changed to a Gemma 💎 hope to film the video tonight & have it up Xmas eve eve or Xmas eve 🎄

#diy #tech #electronics #hardware #soldering #opensource #openhardware #make #makersgonnamake #makersmovement #xmas #holidays #nerdlife

Definitely some stringing happening but I thin…

Definitely some stringing happening but I think overall it’s going to be a decent print after some clean-up 🎄

#diy #tech #3dprinting #xmas #make #makersgonnamake #makersmovement #nerdlife #holidays

Code & circuit work 👍 #diy #tech #electr…

A post shared by Blitz City DIY (@blitzcitydiy) on

Code & circuit work 👍

#diy #tech #electronics #hardware #opensource #arduino #holidays #xmas #make #makersgonnamake #makersmovement #nerdlife

I did a quick video on the Pi Hut’s Xmas…

I did a quick video on the Pi Hut’s Xmas Tree kit mainly because RGB LEDs make for great b-roll 😻🌈🎄[ #linkinbio ]

#diy #tech #electronics #raspberrypi #rgbled #xmas #christmastree #holidays #soldering #hardware #nerdlife

Soldered up the Pi Hut Xmas tree kit tonight …

A post shared by Blitz City DIY (@blitzcitydiy) on

Soldered up the Pi Hut Xmas tree kit tonight 🎄 instead of using the red LEDs in the kit I put in slow changing RGB LEDs 🌈

#diy #tech #electronics #hardware #raspberrypi #make #makersgonnamake #makersmovement #xmastree #holidays #nerdlife

Build an Electric Menorah with Rainbow NeoPixe…

Build an Electric Menorah with Rainbow NeoPixels

⚡NEW VIDEO⚡

As far as holidays go, Christmas is certainly chill but Hanukkah is lit (so sorry)! Bring some color to your eight crazy nights by building a Trinket-powered NeoPixel menorah. Each light can be individually controlled with a power switch to properly celebrate each night.

Hackster.IO Write-Up: https://www.hackster.io/BlitzCityDIY/neopixel-menorah-8b15f6

3D Printing Timelapse: Dreidels 3D printing s…

3D Printing Timelapse: Dreidels

3D printing some dreidels for upcoming Hanukkah festivities. Model can be found here by Zydac: https://www.thingiverse.com/thing:14826

I
scaled the model to 50% in Cura and was able to fit 11 on the Monoprice
Mini Delta’s build plate. There was a little stringing, but nothing
that wasn’t able to be fixed with some snips. Model also prints great at
full size too.

I’m just getting into 3D printing and as a result
timelapses. Please let me know in the comments if you want to see more
of these quick videos of prints going forward.

Just finished 🙌🕎 #diy #tech #electronics #h…

Just finished 🙌🕎

#diy #tech #electronics #hardware #opensource #make #makersgonnamake #makersmovement #hanukkah #holidays #menorah #nerdlife